RKC Digital Temperature Controller RB100, RB400, RB500, RB700, RB900

Save space with a RB series temperature controller that gives outstanding control capability and comprehensive functions incorporated into a slim body case.

• Panel space saving : 60mm depth (RB100 : 63mm depth)
• Easy maintenance Plug-in
• Easy-to-read with large 11-segment LCD display
• Store up to 4 Set Values
• Numerous inputs and outputs (Option)
• Calculates optimum PID values to stabilize control faster than ever
• Sampling 0.25sec
• Easy Fine tuning with 6-level of control response adjustment
• Startup tuning
• Easy parameter setup via USB loader port (Loader communication)

Input	a) Temperature input group Thermocouple : K, J, E, T, R, S, B, N (JIS/IEC), PLII (NBS), W5Re/W26Re (ASTM) RTD : Pt100 (JIS/IEC), JPt100 (JIS) · 3-wire system b) Voltage/Current input group Voltage input (Input impedance : Approx. 1MW) 0 to 1V DC, 0 to 5V DC, 1 to 5V DC, 0 to 10V DC Current input (Input impedance : 250W) 4 to 20mA DC, 0 to 20mA DC * For current input, connect is a 250W shunt resistor to the input terminals. Model code : KD100-55 * Inputs is selectable within each group.
Sampling time	0.25 sec
Measuring accuracy	Input Type Range Accuracy K, J, T, E *1 Lower than -100°C(-148°F) ±(2.0°C[3.6°F] + 1digit) -100 to 500°C(-148 to 932°F) ±(1.0°C[1.8°F] + 1digit) 500°C(932°F) or higher ±(0.2% of Reading + 1digit) N, R, S, PLII *2 W5Re/W26Re Lower than 0°C(-32°F) ±(4.0°C[7.2°F] + 1digit) 0 to 1000°C(32 to 1832°F) ±(2.0°C[3.6°F] + 1digit) 1000°C(1832°F) or higher ±(0.2% of Reading + 1digit) B Lower than 400°C(752°F) ±(70°C[126°F] + 1digit) 400 to 1000°C(752 to 1832°F) ±(2°C[3.6°F] + 1digit) 1000°C(1832°F) or higher ±(0.2% of Reading + 1digit) Pt100, JPt100 Lower than 200°C(752°F) ±(0.4°C[0.7°F] + 1digit) 200°C(392°F) or higher ±(0.2% of Reading + 1digit) Voltage/Current -span to +span ±(0.2% of span + 1digit) *1: Accuracy is not guaranteed for less than -100°C(-148°F) *2: Accuracy is not guaranteed for less than 400°C(752°F) for input type R, S, B and W5Re/W26Re.
Influence of ambient temperature	a) Temperature input : ±0.06°C/°C [at 5 to 40°C] b) Voltage/Current input group : ±0.06% of span/°C [at 5 to 40°C]
Close horizontal mounting error	±2°C(3.6°F) [Less than -100°C(-146°F) input :±3.5°C(6.3°F)]
Control method	a) PID control with autotuning P, PI, PD, ON/OFF control selectable Direct action/Reverse action is selectable b) Heat/Cool type PID control with autotuning
Control output	Relay contact output, Form a contact, 250V AC 3A (Resistive load) Voltage pulse output, 0/12V DC Current output 4 to 20mA DC, 0 to 20mA DC Voltage output, 0 to 5V DC, 1 to 5V DC, 0 to 10V DC SSR (Triac) output Rated current : 0.5A Open collector output (Sink type)
Communication (Optional)	RS-485 (ANSI X3.28 sub-category 2.5A4[RKC standard], MODBUS-RTU)
Standard function	PV bias Digital filter Ramp-to-setpoinst SV step function : Number of SV : 4 points (Default : 1 points) Timer function Loader communication (Communication converter COM-K and software WinUCI for RB series and a Windows XP PC are necessary) Easy Fine tuning with 6-level of control response adjustment
Optional function	Event (Alarm) function : Up to 4 poinsts Control loop break alarm (LBA) Heater break alarm (HBA) Analog retransmission output Digital input : 2points

Please contact us: (+84) 968-966-992

Phiên bản Tiếng Việt của "RKC Digital Temperature Controller RB100, RB400, RB500, RB700, RB900"

• RKC Digital Temperature Controller RB100 
• RKC Digital Temperature Controller RB400 
• RKC Digital Temperature Controller RB500 
• RKC Digital Temperature Controller RB700 
• RKC Digital Temperature Controller RB900