Wednesday, June 17, 2015

Paperless Recorder with Touch Screen.
  • Touch Screen Operation
  • Quick start of recording at the press of REC button.
  • Flexible Inputs
  • Versatile data management function
  • Real-time trend graph
  • Parameter loader function

  Input
Number of Inputs3, 6, 9, 12 points
Input circuitIsolated between each input.
Measurement interval100m sec
Input signalDC voltage, DC current (Using external shunt resistor), Thermocouple, RTD
BurnoutAvailable on TC and DC mV range, ・ON/OFF selectable (per channel)
Influence of external resistance
(Thermocouple)
約0.18µV/Ω
Influence of input lead resistance
(RTD)
Maximum 5Ω per wire
PV Digital filter0 to 99 sec (OFF when 0 is set.)
Scaling range-32000 to +32000 (DC voltage, DC current input)
*Decimal point is programmable
Unit signPreset units or 20 units (each unit eight characters or less) that can be made.
Square Root ExtractionPV ratio + PV bias
Math functionNumber of math channel : 36 channels
Arithmetic, general, multiplication and F value calculation can be computed with each math channel.
・The content of the math can be set and be confirmed only with the Parameter Loader Software (Standard supplied)
F value computation functionF value of each channel (fatal value of the bacterium by the heating sterilization) is computed from the measurement temperature.
The content of the computation can be set and be confirmed only with the Parameter Loader Software (Standard supplied)
Input, Range, Max. Resolution, Measurement Accuracy
DC Voltage / DC CurrentmV-10.00 to +10.0010µV±(0.1%+1digit)
0.00 to +20.0010µV
0.00 to +50.0010µV
V-0.200 to +0.2001mV
-1.000 to +1.0001mV
-10.00 to +10.0010mV
0.000 to +5.0001mV
mA4.00 to 20.000.01mA
ThermocoupleB *10.0 to 1820.00.1°C±(0.1%+1digit)
R *20.0 to 1760.00.1°C
0.0 to 1200.00.1°C
S *20.0 to 1760.00.1°C
K-200.0 to 1370.00.1°C±(0.1%+1digit)

-200.0 to 0.0°C
: ±(0.15%+1digit)
-200 to 600.00.1°C
-200.0 to 300.00.1°C
E-200.0 to 800.00.1°C
-200.0 to 300.00.1°C
-200.0 to 150.00.1°C
J-200.0 to 1100.00.1°C
-200.0 to 400.00.1°C
-200.0 to 200.00.1°C
T-200.0 to 400.00.1°C
-200.0 to 200.00.1°C
C (W5Re/W26Re)0.0 to 2320.00.1°C±(0.1%+1digit)
Au-Fe *31.0 to 300.00.1K±(0.2%+1digit)
N0.0 to 1300.00.1°C±(0.1%+1digit)
PR40-20 *40.0 to 1880.00.1°C±(0.2%+1digit)
PL II0.0 to 1390.00.1°C±(0.1%+1digit)
U-200.0 to 400.00.1°C ±(0.1%+1digit)
-200.0 to 0.0°C
: ±(0.15%+1digit)
L-200.0 to 900.00.1°C
RTDPt100-200.0 to 650.00.1°C ±(0.1%+1digit)
-200.0 to 200.00.1°C
JPt100-200.0 to 630.00.1°C
-200.0 to 200.00.1°C
*1   0 to 400°C : ±4%,   400 to 800°C : ±(0.15%+1digit)
*2   0 to 200°C : ±(0.15%+1digit)
*3   1 to 20K : ±(0.5%+1digit),   20 to 50K : ±(0.3%+1digit)
*4   0 to 300°C : ±(1.5%+1digit),   300 to 800°C : ±(0.8%+1digit)
*5   Reference Junction Compensation (Ambient temperature : 23°C±2°C)
        R, S, PR40-20, Au-Fe : ±1.0°C,   K, E, J, T, C, N, PL II, U, L : ±0.5°C
  Display
DisplayTouch Panel type 5.7-inch TFT color LCD (320 x 240 dots)
Display color16 colors
Display languageEnglish/Japanese (Selectable by setting)
Display groupNumber of groups : Main records 6, Sub record 1
Number of channels : Max. 12 channels/group
Display interval1 sec
  Recording
External memorySD memory card (SD/SDHC)
Internal memoryApprox. 100MB
Memory CapacitySD : Max. 2GB, SDHC : Max. 32GB
Main record dataTrend graph, Event Data, Message data
Sub record dataTrend graph
 • The record condition can be selected from "sync.", "Alarm", "DI".
Recording cycle1 sec to 60 min (SUB record is possible 100m sec)
Trend dataMinimum value, Maximum value, Current value
Average value (Selectable)
Data saving cycle1 hour to 1 year
 • Data is first saved to the internal memory and then copied to the SD card at the specified cycle. When the internal memory is full or when recording is stopped, data is saved to the SD card.
Other record dataAlarm status, Message
Memory remaining capacity displayWhen the SD card is full, recording is stopped or data can overwrite oldest data (whichever is selected)
Data formatBinary or Binary + CSV format (Selectable)
 ´Standard Function
AlarmNumber of alarm setting : Max. 4 point per channel
Alarm type : High limit, Low limit, Abnormal data
Alarm output : 1 point
Open collector output, 30V DC. 20mA
CommunicationType :Ethernet (10BASE-T)
Protocol :Modbus/TCP
 • Built in HTTP server and FTP server
  Optional Function
CommunicationType :RS-485
Protocol :Modbus RTU
Bit format :
Start bit : 1, Data bit :8, Parity bit : Without, Odd or Even
Communication speed : 9600 bps
Maximum connection : 32 units (Including host)
Digital input / Digital output12 channel type is not available with Digital input/Digital output.
Number of Digital input : 9 points, Non-voltage input (Same common)
Digital input function
Recording RUN/STOP, Message setting, Multiplication value RESET, LCD backlight ON/OFF
Number of Digital output : 12 points, Open collector output (Same common) 30V DC, 20mA/point
Digital output function : Alarm output
Relay contact output12 channel type is not available with Relay contact output.
Number of Relay contact output : 6 points, 250V AC 3A, 30D DC 3A
(• 3A/common, Total : Less than 9A)
Output function : Alarm output
Remote AIA maximum of 6 remote units can be connected via RS-485.
  General Specifications
Power supply85 to 264V AC (50/60 Hz)
Power consumptionPower supply voltage 100V AC : LCD ON 15VA, LCD OFF 12VA
Power supply voltage 200V AC : LCD ON 25VA, LCD OFF 22VA
Memory backupFlash memory.
Clock backup : Lithium battery.
(Life : Approx 5years at non power supply status)
Insulation resistanceBetween terminals and ground : 20MW or more (at 500V DC)
Dielectric strength500V AC for one minute between input terminals
500V AC for one minute between input terminals and ground
2000V AC for one minute between power terminals and ground
Ambient temperature0 to 50°C
Ambient humidity20 to 80% RH
Compliance with StandardsCE marking :
EMC : EN61326-1
LVD : EN61010-1
Waterproof / DustproofIP65 (Front panel)
Net WeightApprox 1.0kg (3 channels type)

Please contact us: (+84) 968-966-992
Phiên bản Tiếng Việt của "RKC Paperless Recorder VGR-B100"
Phân phối độc quyền RKC Instrument

0 comments:

Post a Comment